Command Line Reference Guide

SNMP and Syslog | 1389
Command
History
Usage
Information
When you decrease the buffer size, all messages stored in the buffer are lost. Increasing the buffer size
does not affect messages stored in the buffer.
Related
Commands
logging console
c e s
Specify which messages are logged to the console.
Syntax
logging console [level]
To return to the default values, enter default logging console. To disable logging to the console, enter
no logging console.
Parameters
Defaults
7 or debugging
Command Modes
CONFIGURATION
Command
History
Related
Commands
logging facility
c e s
Configure the Syslog facility, used for error messages sent to Syslog servers.
Syntax
logging facility [facility-type]
To return to the default values, enter no logging facility.
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
E-Series legacy command
clear logging Clear the logging buffer.
default logging buffered Returns the logging buffered parameters to the default setting.
show logging Display the logging setting and system messages in the internal buffer.
level
(OPTIONAL) Indicate a value from 0 to 7 or enter one of the following parameters: emergencies,
alerts, critical, errors, warnings, notifications, informational, or debugging.
Default: 7 or debugging.
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
E-Series legacy command
clear logging Clear logging buffer.
default logging console Returns the logging console parameters to the default setting.
show logging Display logging settings and system messages in the internal buffer.