Command Line Reference Guide

Router Information Protocol (RIP) | 1259
Command Modes
ROUTER RIP
Command
History
Usage
Information
Although the passive interface will neither send nor receive routing updates, the network on that
interface will still be included in RIP updates sent via other interfaces.
Related
Commands
redistribute
c e s
Redistribute information from other routing instances.
Syntax
redistribute {connected | static}
To disable redistribution, use the no redistribute {connected | static} command.
Parameters
Defaults
Not configured.
Command Modes
ROUTER RIP
Command
History
Usage
Information
To redistribute the default route (0.0.0.0/0), configure the default-information originate command.
Related
Commands
redistribute isis
e
Redistribute routing information from an IS-IS instance.
Syntax
redistribute isis [tag] [level-1 | level-1-2 | level-2] [metric metric-value] [route-map
map-name]
To disable redistribution, use the no redistribute isis [tag] [level-1 | level-1-2 | level-2] [metric
metric-value] [route-map map-name] command.
Version 7.8.1.0 Introduced on S-Series
Version 7.6.1.0 Introduced on C-Series
pre-Version 6.2.1.1 Introduced on E-Series
neighbor Enable RIP for a specified network.
network Define a neighbor.
connected Enter the keyword connected to specify that information from active routes on
interfaces is redistributed.
static Enter the keyword static to specify that information from static routes is redistributed.
Version 7.8.1.0 Introduced on S-Series
Version 7.6.1.0 Introduced on C-Series
pre-Version 6.2.1.1 Introduced on E-Series
default-information
originate
Generate a default route for RIP traffic.