Command Line Reference Guide

1172 | Private VLAN (PVLAN)
www.dell.com | support.dell.com
Related
Commands
show vlan private-vlan
c s
Display PVLANs and/or interfaces that are part of a PVLAN.
Syntax
show vlan private-vlan [community | interface | isolated | primary | primary_vlan |
interface interface]
Parameters
Defaults
none
Command Modes
EXEC
Interface Type Displays the PVLAN port type of the designated interface.
Status States whether the interface is operationally up or down.
Table 45-1. show interfaces description Command Example Fields
Field Description
private-vlan mode Set the mode of the selected VLAN to community, isolated, or primary.
show vlan private-vlan Display PVLANs and/or interfaces that are part of a PVLAN.
show vlan private-vlan mapping Display primary-secondary VLAN mapping.
switchport mode private-vlan Set the PVLAN mode of the selected port.
community (OPTIONAL) Enter the keyword community to display VLANs
configured as community VLANs, along with their interfaces.
interface (OPTIONAL) Enter the keyword community to display VLANs
configured as community VLANs, along with their interfaces.
isolated (OPTIONAL) Enter the keyword isolated to display VLANs configured
as isolated VLANs, along with their interfaces.
primary (OPTIONAL) Enter the keyword primary to display VLANs configured
as primary VLANs, along with their interfaces.
primary_vlan
(OPTIONAL) Enter a private VLAN ID or secondary VLAN ID to display
interface details about the designated PVLAN.
interface interface (OPTIONAL) Enter the keyword interface and an interface ID to display
the PVLAN configuration of the designated interface. Enter the following
keywords and slot/port or number information:
• For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet
followed by the slot/port information.
• For a Port Channel interface, enter the keyword port-channel followed
by a number:
C-Series Range: 1-128
E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale and 1 to
512 for ExaScale.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE
followed by the slot/port information.
• For a VLAN interface, enter the keyword
vlan followed by the VLAN
ID. The VLAN ID range is from 1 to 4094.