Command Line Reference Guide

1086 | Open Shortest Path First (OSPFv2 and OSPFv3)
www.dell.com | support.dell.com
Defaults
Enabled, that is sending of routing updates are enabled by default
Command Modes
ROUTER OSPFv3
Command
History
Usage
Information
By default, no interfaces are passive. Routing updates are sent to all interfaces on which the routing
protocol is enabled.
If you disable the sending of routing updates on an interface, the particular address prefix will continue
to be advertised to other interfaces, and updates from other routers on that interface continue to be
received and processed.
OSPFv3 for IPv6 routing information is neither sent nor received through the specified router interface.
The specified interface address appears as a stub network in the OSPFv3 for IPv6 domain.
redistribute
c e
Redistribute into OSPFv3.
Syntax
redistribute {bgp as number} {connected | static} [metric metric-value | metric-type
type-value] [route-map map-name] [tag tag-value]
To disable redistribution, use the no redistribute {connected | static} command.
Parameters
Default
Not configured.
Version 8.4.6.0
Added support for the keyword
fortyGigE.
Version 7.8.1.0 Added support for C-Series
Version 7.4.1.0 Introduced
bgp as number Enter the keyword bgp followed by the autonomous system number.
Range: 1 to 65535
connected Enter the keyword connected to redistribute routes from physically
connected interfaces.
static Enter the keyword static redistribute manually configured routes.
metric metric-value
Enter the keyword metric followed by the metric value.
Range: 0 to 16777214
Default: 20
metric-type
type-value
(OPTIONAL) Enter the keyword metric-type followed by the OSPFv3 link
state type of 1 or 2 for default routes. The values are:
1 = Type 1 external route
2 = Type 2 external route
Default: 2
route-map
map-name
(OPTIONAL) Enter the keyword route-map followed by the name of an
established route map. If the route map is not configured, the default is deny (to
drop all routes).
tag tag-value (OPTIONAL) Enter the keyword tag to set the tag for routes redistributed into
OSPFv3.
Range: 0 to 4294967295
Default: 0