Command Line Reference Guide

Open Shortest Path First (OSPFv2 and OSPFv3) | 1067
Example
Figure 38-19. Command Example: show ip ospf process-id statistics global
Table 38-12. Command Example Descriptions: show ip ospf statistics process-id global
Row Heading Description
Total Displays the total number of packets received/transmitted by the OSPF process
Error Displays the error count while receiving and transmitting packets by the OSPF process
Hello Number of OSPF Hello packets
DDiscr Number of database description packets
LSReq Number of link state request packets
LSUpd Number of link state update packets
LSAck Number of link state acknowledgement packets
TxQ-Len The transmission queue length
RxQ-Len The reception queue length
Tx-Mark The highest number mark in the transmission queue
Rx-Mark The highest number mark in the reception queue
Hello-Q The queue, for transmission or reception, for the hello packets
LSR-Q The queue, for transmission or reception, for the link state request packets.
Other-Q The queue, for transmission or reception, for the link state acknowledgement, database
description, and update packets.
Table 38-13. Error Definitions: show ip ospf statistics process-id global
Error Type Description
Intf_Down Received packets on an interface that is either down or OSPF is not enabled.
Non-Dr Received packets with a destination address of ALL_DRS even though SELF is not a
designated router
FTOS#show ip ospf 1 statistics global
OSPF Packet Count
Total Error Hello DDiscr LSReq LSUpd LSAck
RX 10 0 8 2 0 0 0
TX 10 0 10 0 0 0 0
OSPF Global Queue Length
TxQ-Len RxQ-Len Tx-Mark Rx-Mark
Hello-Q 0 0 0 2
LSR-Q 0 0 0 0
Other-Q 0 0 0 0
Error packets (Only for RX)
Intf-Down 0 Non-Dr 0 Self-Org 0
Wrong-Len 0 Invld-Nbr 0 Nbr-State 0
Auth-Err 0 MD5-Err 0 Chksum 0
Version 0 AreaMis 0 Conf-Issues 0
No-Buffer 0 Seq-No 0 Socket 0
Q-OverFlow 0 Unkown-Pkt 0
Error packets (Only for TX)
Socket Errors 0
FTOS#