Command Line Reference Guide

1066 | Open Shortest Path First (OSPFv2 and OSPFv3)
www.dell.com | support.dell.com
Defaults
No default behavior or values
Command Modes
EXEC
EXEC Privilege
Command
History
Usage
Information
If you are using Multi-Process OSPF, you must enter the Process ID to view information regarding a
specific OSPF process. If you do not enter the Process ID, only the first configured process is listed.
interface name
(OPTIONAL) Enter the keyword interface followed by one of the following
interface keywords and slot/port or number information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/port information.
• For a Port Channel interface, enter the keyword
port-channel followed by
a number:
C-Series and S-Series Range: 1-128
E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale and 1 to 512
for ExaScale.
• For a SONET interface, enter the keyword
sonet followed by the slot/port
information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed
by the slot/port information.
• For a VLAN, enter the keyword
vlan followed by a number from 1 to 4094.
neighbor router-id
(OPTIONAL) Enter the keyword neighbor followed by the neighbor’s
router-id in dotted decimal format (A.B.C.D.).
Version 8.4.6.0
Added support for the keyword
fortyGigE.
Version 7.8.1.0 Introduced support of Multi-Process OSPF.
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
Version 7.4.1.0 Introduced on E-Series