Dell C5518QT Dell Display Control User’s Guide
Copyright © 2017 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners. 2017 – 09 Rev.
Contents Dell Display Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Main window . . . . . . . . . . . . . . . . . . . . . . . . . 5 Tools Window . . . . . . . . . . . . . . . . . . . . . . . . 6 Info window . . . . . . . . . . . . . . . . . . . . . . . . . 8 Help Desk window . . . . . . . . . . . . . . . . . . . . . . 9 Emergency Alert . . . . . . . . . .
Dell Display Control Open a web browser and enter the display’s IP address (e.g. http://192.168.0.30) in the address bar. The Home page opens and click Crestron for the control interface. The Main window as shown below is displayed. As shown above, you can open a window by clicking the corresponding tab at the top right of the window. Tab Tools Info Contact IT Help Description Opens Tools window. Opens Info window. Opens Help Desk window.
Main window 1 2 4 3 You can operate the basic controls of the monitor on this screen. 1 Click a button and operate as follows. Button Power Vol -/ Vol + Mute Description Turns the power on/off Adjusts the volume settings Toggles Mute on/off 2 Sources List You can click a button to switch the input channel. The cursor will move according to the currently selected input port. Button VGA DP HDMI 1 HDMI 2 HDMI 3 Description Selects input from VGA port. Selects input from DP port.
4 Click the button and operate in the same way as the remote control. Button Menu Enter Exit Menu Description Assigned the same operation as MENU button. Assigned the same operation as ENTER button. Assigned the same operation as EXIT MENU button. Assigned the same operation as button. Assigned the same operation as button. Assigned the same operation as button. Assigned the same operation as button.
2 Monitor Configures the monitor settings. Item Monitor Name Location Assigned To Description Configures the name of the monitor. The length of the Monitor Name can be up to 22 alphanumeric characters. Configures the location name of the monitor. You can specify a Location name up to 22 alphanumeric characters. Configures the user name for the monitor. You can specify a user name up to 22 alphanumeric characters. The usable symbols are space and the following; !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~ To apply the se
Info window 1 Room 2 Name Displays the settings and status of the monitor. Click the [Exit] button to return to the Main window. 1 Monitor Information Item Monitor Name Location Firmware Version MAC address Assigned To Description Displays the monitor name settings. Displays the the location name of the monitor. Displays the version of the monitor firmware. Displays the wired LAN MAC address of the monitor. Displays the user name for the monitor.
Help Desk window Sends/receives messages to/from the administrator for Crestron RoomView® Express. Button Send Description Sends a message. Emergency Alert When the administrator for Crestron RoomView® Express sends out an alert message, it will be displayed on the screen.
