User’s Guide
Table Of Contents
- Safety Instructions
- About Your Monitor
- Setting Up the Monitor
- Setting Up the Stand
- Operating the Monitor Webcam
- Organizing Your Cables
- Securing Your Monitor Using Kensington Lock (optional)
- Connecting Your Monitor
- Using the Tilt, Swivel, and Vertical Extension
- Rotating the Monitor
- Adjusting the Rotation Display Settings of Your System
- Removing the Monitor Stand
- VESA Wall Mounting (optional)
- Operating the Monitor
- Troubleshooting
- Appendix
Setting Up the Monitor │ 47
3. Use a Phillips crosshead screwdriver to remove the four screws securing the
plastic cover.
4. Attach the mounting bracket from the wall mounting kit to the monitor.
5. Mount the monitor on the wall. For more information, see the documentation
that shipped with the wall mounting kit.
NOTE: For use only with UL or CSA or GS-listed wall mount bracket
with minimum weight or load bearing capacity of 15.32 kg (C2423H)/
20.16 kg (C2723H).