Reference Guide

slot slot-id
npuUnit npu-id
hg-port-channel
0
Specify a HiGig port channel on a line-card (leaf) NPU by
entering the keyword slot and slot number, then npuUnit
and NPU ID, then hg-port-channel 0. Line-card slot
numbers are 0 to 11; line-card NPU ID is 0. The HiGig port-
channel ID is from 0 to 2.
Command Modes
EXEC, EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.2.(1.0) Introduced on the Z9500.
9.3.0.0 Introduced on the Z9000.
Usage Information The following table illustrates the fields displayed in the output of this command:
Table 3. show hg-link-bundle-distribution Command Description
Field Description
Link-bundle trigger threshold Percentage value of link-bundle
bandwidth that serves as the threshold
for marking a link bundle as being
overutilized, triggering link-bundle
monitoring, and generating an SNMP
alarm.
Slot Slot number of a line card.
npuUnit Network processing unit (NPU) ID
number of a HiGig link bundle/port-
channel.
hg-port-channel Port-channel number of a HiGig link
bundle.
Utilization (In Percent) Percentage of total bandwidth usage
by the traffic transmitted on the HiGig
link bundle.
Alarm State Indicates whether an alarm has been
generated if uneven traffic distribution
occurs in a HiGig link bundle. Possible
values are Active and Inactive.
Interface Member interface of the specified
HiGig link bundle/port channel in the
format:
slot-id/npu-id:hghigig-port-number
974
Interfaces