Reference Guide

pps 0
Input overrun: 0 0
pps 0
Output underruns: 0 0
pps 0
Output throttles: 0 0
pps 0
m - Change mode c - Clear
screen
l - Page up a - Page down
T - Increase refresh interval t - Decrease
refresh interval
q - Quit
mtu
Set the link maximum transmission unit (MTU) (frame size) for an Ethernet interface.
C9000 Series
Syntax
mtu value
To return to the default MTU value, use the no mtu command.
Parameters
value Enter a maximum frame size in bytes. The range is from 594
to 12000. The default is 1554.
Defaults 1554
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.5.1.0 Introduced on the C-Series.
6.2.1.0 Introduced on the E-Series.
Interfaces
891