Reference Guide

Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage Information After you enable FTP server functions with the ftp-server enable command,
Dell Networking recommends specifying a top-level directory path. Without a top-
level directory path specified, the system directs users to the flash directory when
logging in to the FTP server.
Related
Commands
ftp-server enable — enables FTP server functions on the switch.
ftp-server username — sets a username and password for incoming FTP
connections.
ftp-server username
Create a user name and associated password for incoming FTP server sessions.
C9000 Series
Syntax
ftp-server username username password [encryption-type]
password
To delete a user name and its password, use the no ftp-server username
username command.
Parameters
username Enter a text string up to 40 characters long as the user
name.
password
password
Enter the keyword password then a string up to 40
characters long as the password. Without specifying an
encryption type, the password is unencrypted.
encryption-type (OPTIONAL) After the keyword password, enter one of the
following numbers:
86
Control and Monitoring