Reference Guide

xor2 Use CRC16_BISYNC_AND_XOR2 — Upper 8 bits of CRC16-
BISYNC and lower 8 bits of xor2.
xor4 Use CRC16_BISYNC_AND_XOR4 — Upper 8 bits of CRC16-
BISYNC and lower 8 bits of xor4.
xor8 Use CRC16_BISYNC_AND_XOR8 — Upper 8 bits of CRC16-
BISYNC and lower 8 bits of xor8.
xor16 Use CR16 — 16-bit XOR.
crc16cc Use CRC16_CCITT — 16-bit CRC16 using CRC16-CCITT
polynomial.
crc32MSB Use CRC32_UPPER — MSB 16 bits of computed CRC32.
crc32LSB Use CRC32_LOWER — LSB 16 bits of computed CRC32.
linecard slot-id
port-set port-pipe
Enter the linecard slot ID and port-pipe number for the set
of ports for which you want to redistribute traffic flows. The
range of slot IDs is 0 to 11. The range of port-pipe numbers
is 0.
Defaults crc16 algorithm
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.11.4 Introduced on the Z9000.
hash-algorithm hg-seed
Select the seed value used in HiGig hashing.
C9000 Series
Syntax
[no] hash-algorithm hg-seed number [linecard slot-id port-set
port-pipe]
Parameters
hg-seed number Enter the keywords hg-seed then the hash algorithm seed
value. The range is from 0 to 2147483646.
Equal Cost Multi-Path (ECMP)
791