Reference Guide

Parameters

name Give a name to the group of addresses in a pool.

Defaults none

Command Modes DHCP <POOL>

Command History

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Introduced on the C9010.

9.2(1.0) Introduced on the Z9500.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

8.2.1.0 Introduced on the C-Series and S-Series.

excluded-address

Prevent the server from leasing an address or range of addresses in the pool.

C9000 Series

Syntax

excluded-address [address | low-address high-address]

Parameters

address Enter a single address to be excluded from the pool.

low-address Enter the lowest address in a range of addresses to be

excluded from the pool.

high-address Enter the highest address in a range of addresses to be