Reference Guide

param2=0(0), param3=0(0)}
action={act=EtagNew, param0=327687(0x50007), param1=0(0),
param2=0(0), param3=0(0)}
policer=
statistics={stat id 166 slice = 5 idx=0 entries=1}{Packets}
EID 0x00000e01: gid=0x2,
slice=1, slice_idx=0, part =0 prio=0xe01, flags=0x10602,
Installed, Enabled
tcam: color_indep=1024,
IpType
Offset: 325 Width: 4
DATA=0x00000000
MASK=0x0000000e
InPort
DATA=0x0000000000000000000000000000000000000000000000000000000000000004
MASK=0x00000000000000000000000000000000000000000000000000fdffffffffffff
InPorts
DATA=0x0000000000000000000000000000000000000000000000000000000000000004
MASK=0x00000000000000000000000000000000000000000000000000fdffffffffffff
HiGig
Offset: 320 Width: 1
DATA=0x00000000
MASK=0x00000001
Stage
IpFrag
Offset: 71 Width: 2
DATA=0x00000001
MASK=0x00000001
action={act=CopyToCpuCancel, param0=0(0), param1=0(0),
param2=0(0), param3=0(0)}
action={act=EtagNew, param0=327687(0x50007), param1=0(0),
param2=0(0), param3=0(0)}
policer=
statistics={stat id 167 slice = 6 idx=0 entries=1}{Packets}
show hardware ipv6
Display information about IPv6 ACLs used on a line card and port pipe.
C9000 Series
Syntax
show hardware ipv6 {eg-acl | in-acl} linecard slot-id port-set
port-pipe
Parameters
eg-acl | in-acl Enter either the keyword eg-acl or the keyword in-acl to
display ingress or egress ACL data.
linecardslot-id Enter the linecard slot-id parameters to specify a line
card on the switch. The range of slot IDs is from 0 to 2.
port-set port-pipe Enter the keywords port-set port-pipe parameters to
specify a port pipe (set of ports) on a line card. The range of
744
Debugging and Diagnostics