Reference Guide

Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
9.2(0.0) Modified the drops keyword range, unit keyword range
and added the buffer and cpu management
statistics
options.
8.3.19.0 Introduced on the S4820T.
8.3.11.5 Added i2c statistics and sata-interfaces statistics.
8.3.11.4 Added user port information.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Introduced on the S-Series.
Usage Information Use the remote-exec command to remotely execute a command on the Route
Processor and line-card (LP) processor from the Control Processor.
Related
Commands
show hardware — displays information on hardware components.
show hardware
Display input and output traffic statistics and other operational information about a specified hardware
component.
C9000 Series
Syntax
show hardware {cp {cpu {data-plane | i2c | management| sata-
interface}}
buffer-stats-snapshots {resource interface interface}
cp-switch {counters | details | drops | port-stats |register |
table-dump}
|
forwarding-table mode
linecard slot-id {buffer {total-buffer | unit unit-num [port
port-num [queue queue-num]]} |
pe pe-id stack-unit unit number {cpu | drops | stack-port |
unit}
722
Debugging and Diagnostics