Reference Guide

show running-config dcb-buffer-threshold
Display the DCB buffer threshold details in the running configuration.
C9000 Series
Syntax
show running—config buffer-threshold
Command Modes
EXEC
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.7(0.0) Introduced on the S6000-ON.
9.3(0.0) Introduced on the S6000 platform.
Usage Information The following table describes the output fields displayed for the show running-config dcb-
buffer-threshold command:
Field Description
Profile name Name of the DCB buffer threshold profile
Priority The priority of the queue for which the buffer space settings apply
buffer-size Ingress buffer size
pause-threshold-
value
Buffer limit at which the port sends the pause to peer in KB.
resume-
threshold-value
Buffer offset limit at which the port resumes the peer in KB.
The following table describes the output fields displayed for the show interface pfc
buffer-threshold command:
Field Description
queue Number of the queue
lossless Whether the queue is a lossy or lossless queue for which buffer threshold
is configured
buffer-size Ingress buffer size
pause-threshold-
value
Buffer limit at which the port sends the pause to peer in KB.
Data Center Bridging (DCB)
691