Reference Guide

show interfaces ets
Displays the ETS configuration applied to egress traffic on an interface, including priority groups with
priorities and bandwidth allocation.
C9000 Series
Syntax
show interface port-type slot/port ets {summary | detail}
Parameters
port-type slot/
port ets
Enter the port-type slot and port ETS information.
{summary | detail} Enter the keyword summary for a summary list of results or enter the
keyword detail for a full list of results.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.0.2.0 Introduced on the S6000.
9.2(0.2) Down status messages added.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.16.0 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
To clear ETS TLV counters, use the clear ets counters interface port-type slot/port
command.
To view the ETS show output for multiple ports of a specified slot, you can specify any random
port number or a range of ports, or a combination of both.
To specify a port range, you can enter a hyphenated range of one or more port range values
separated with commas; for example, show interfaces tengigabitethernet 10/0-1 ets
summary. To enter any random number of ports, you can enter a comma-separated string of port
numbers, for example
show interfaces tengigabitethernet 10/2,4 ets summary
The following describes the show interface summary command shown in the following
example.
Field Description
Interface Interface type with stack-unit and port number.
Data Center Bridging (DCB)
655