Reference Guide

To clear the per-protocol counters of rate-limited control-plane traffic at the
aggregated (switch) or line card and port set level, use the clear control-
traffic protocol command.
Example (PE)
Dell#show control-traffic protocol pe 3 stack-unit 0 portset 0
counters
Protocol RxBytes TxBytes
Drops
------- ------- -------
------
STP/ARP/ICMP(v4/v6)/IGMP/MLD/NTP/FTP/TELNET/SSH 0 0
0
PE CSP/PE-CB LLDP 131227 131227
0
LLDP/LACP/8021x 0 0 0
Example
Dell#show control-traffic protocol linecard 2 portset 0
counters
Protocol RxBytes TxBytes Drops
------- ------- ------- -----
STP 14956278172 403036 14955875136
LLDP 15029657016 559096 15029097920
PVST 0 0 0
LACP 15122824104 556648 15122267456
GVRP 14988129080 551480 14987577600
ARP RESP/ARP REQ 29604578172 3559868 29601018304
802.1x 0 0 0
FEFD 0 0 0
FRRP 0 0 0
ECFM 0 0 0
L2PT 0 0 0
ISIS 0 0 0
BFD 0 0 0
BGP 0 0 0
v6 BGP 0 0 0
OSPF 0 0 0
v6 OSPF 0 0 0
RIP 0 0 0
VRRP 0 0 0
v6 VRRP 0 0 0
IGMP 0 0 0
PIM 0 0 0
NTP 0 0 0
MULTICAST CATCH ALL 0 0 0
v6 MULTICAST CATCH ALL 0 0 0
DHCP RELAY/DHCP 0 0 0
v6 ICMP NA/v6 ICMP RA 0 0 0
v6 ICMP NS/v6 ICMP RS 0 0 0
v6 ICMP/ICMP 0 0 0
MLD 0 0 0
MSDP 0 0 0
FTP/TELNET/SSH/
L3 LOCAL TERMINATED 0 0 0
L3 UNKNOWN/UNRESOLVED ARP 0 0 0
iSCSI 0 0 0
FCoE 0 0 0
SFLOW 0 0 0
VLT CTRL/VLT IPM PDU 0 0 0
HYPERPULL 0 0 0
OPENFLOW 0 0 0
L2 DST HIT/BROADCAST 0 0 0
VLT TTL1/TRACEFLOW/TTL0/
626
Control Plane Policing (CoPP)