Reference Guide

ipv4acl Allocates space for the L3 ACL. The default value is 2.
ipv6acl Allocates space for the IPv6 L3 ACL. The default value is 2
Defaults None
Command Modes CONFIG
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
Usage Information
Enter the CAM profile name and specify the amount of CAM space. The total space
allocated must be equal to 13. The range for ipv4acl is from 1 to 4. The ipv6acl
range must be a factor of 2.
Related
Commands
show cam-acl-egress-pe
cam-acl-pe
Allocate content addressable memory (CAM) for the port extender.
C9000 Series
Syntax
cam-acl-pe [default| l2acl number ipv4acl number ipv6acl number
ipv4qos number l2qos number ipmacacl number]
Parameters
default Resets ACL CAM entries to default setting.
l2acl Allocates space for the L2 ACL. The default value is 5.
ipv4acl Allocates space for the L3 ACL. The default value is 2.
ipv6acl Allocates space for the IPv6 L3 ACL. The default value is 2.
ipv4qos Allocates space for the L3 QoS. The default value is 2.
l2qos Allocates space for L2 QoS. The default value is 1.
ipmacacl (Optional) Allocates space for IP and MAC ACLs. The default
value is 0.
Defaults None
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command-Line Reference Guide.
Content Addressable Memory (CAM)
609