Reference Guide

Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
neighbor distribute-list
Distribute BGP information via an established prefix list.
C9000 Series
Syntax
neighbor {ipv6-address | peer-group-name} distribute-list
prefix-list-name {in | out}
To delete a neighbor distribution list, use the no neighbor {ipv6-address |
peer-group-name} distribute-list prefix-list-name {in | out}
command.
Parameters
ipv6-address Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
peer-group-name Enter the name of the peer group.
prefix-list-name Enter the name of an established prefix list. If you do not
configure the prefix list, the default is permit (to allow all
routes).
in Enter the keyword in to distribute only inbound traffic.
out Enter the keyword out to distribute only outbound traffic.
Defaults Not configured.
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
Usage Information Other BGP filtering commands include the neighbor filter-list and
neighbor route-map commands.
566
Border Gateway Protocol