Reference Guide

Version Description
9.2(1.0) Introduced on the Z9500.
7.4.1.0 Introduced
debug ip bgp ipv6 unicast dampening
View information on routes being dampened.
C9000 Series
Syntax
debug ip bgp ipv6 unicast dampening
To disable debugging, use the no debug ip bgp ipv6 unicast dampening
command.
Parameters
dampening Enter the keyword dampening to clear route flap
dampening information.
Command Modes EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
7.4.1.0 Introduced
debug ip bgp ipv6 unicast updates
View information about BGP updates.
C9000 Series
Syntax
debug ip bgp ipv6 unicast ipv6-address prefix-length updates
[in | out]
To disable debugging, use the no debug ip bgp ipv6 unicast ipv6-
address prefix-length updates [in | out] command.
Parameters
ipv6-address
prefix-length
Enter the IPv6 address in the x:x:x:x::x format followed by
the prefix length in the /x format. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
updates Enter the keyword updates to view BGP update
information.
556
Border Gateway Protocol