Reference Guide

clear ip bgp ipv6 unicast
Reset MBGP sessions.
C9000 Series
Syntax
clear ip bgp ipv6 unicast * ipv6-address prefix-length
[dampening | flap-statistics] peer-group]
Parameters
* Enter the character * to clear all peers.
ipv6-address
prefix-length
Enter the IPv6 address in the x:x:x:x::x format followed by
the prefix length in the /x format. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
dampening (OPTIONAL) Enter the keyword dampening to clear route
flap dampening information.
flap-statistics (OPTIONAL) Enter the keywords flap-statistics to
reset the flap statistics on all prefixes from that neighbor.
peer-group (OPTIONAL) Enter the keywords peer-group to clear all
members of a peer-group.
Command Modes EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
7.4.1.0 Introduced
clear ip bgp ipv6 unicast dampening
Clear information on route dampening.
C9000 Series
Syntax
clear ip bgp dampening ipv6 unicast [network network-mask]
Parameters
network (OPTIONAL) Enter the IPv6 network address in x:x:x:x::x
format.
network-mask If you enter the network address, then enter the network
mask, from 0 to 128.
Command Modes EXEC Privilege
552
Border Gateway Protocol