Reference Guide
All the show and debugs commands display the link band width extended-
community prefixed with DMZ-Link-bw along with other extended communities.
Dell#show ip bgp 3.3.3.0/24
BGP routing table entry for 3.3.3.0/24
Paths: (1 available, table Default-IP-Routing-Table.)
Not advertised to any peer
Received from :
1.1.1.2 (3.3.3.1) Best
AS_PATH :
Next-Hop : 1.1.1.2, Cost : 0
Origin IGP, Metric 0, LocalPref 100, Weight 0, internal
Extended Communities :
DMZ-Link Bw: 2000 kbytes*
Related
Commands
show ip bgp community — views the BGP communities.
neighbor maximum-prefix — controls the number of network prefixes received.
show ip bgp cluster-list
View BGP neighbors in a specific cluster.
C9000 Series
Syntax
show ip bgp [vrf vrf-name] [ipv4 {multicast | unicast} | ipv6
unicast] cluster-list [cluster-id]
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword vrf and then the name of
the VRF to view cluster information of BGP neighbors
corresponding to that VRF.
ipv4 multicast (OPTIONAL) Enter the keywords ipv4 followed by the
keyword multicast to view information related only to
ipv4 multicast routes.
ipv4 unicast (OPTIONAL) Enter the keyword ipv4 followed by the
keyword unicast to view information related only to ipv4
multicast routes.
ipv6 unicast (OPTIONAL) Enter the keyword ipv6 followed by the
keyword unicast to view information related to only to the
ipv6 unicast routes.
cluster-id (OPTIONAL) Enter the cluster id in dotted decimal format.
The range is 1 — 4294967295.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
Border Gateway Protocol
475