Reference Guide

ManualsBrandsDell ManualsAccess PlatformsC1048P Port Extender

301

302

303

304

305

306

307

308

309

310

Parameters

access-list-name Enter the name of the egress IP ACL to be applied to

member interfaces of the VLAN group (140 characters

maximum).

out Enter the keyword out to apply the ACL to outgoing traffic.

implicit-permit

Enter the keyword implicit-permit to change the

default action of the ACL from implicit-deny to implicit-

permit (that is, if the traffic does not match the filters in the

ACL, the traffic is permitted instead of dropped).

Default None

Command Modes ACL-VLAN-GROUP CONFIGURATION (conf-acl-vl-grp)

Command History

Version Description

9.9(0.0) Introduced on the C9010.

9.5(0.0) Introduced on the Z9500.

9.3(0.0) Introduced on the S4810, S4820T, and Z9000.

Usage Information You can apply only an egress IP ACL on an ACL VLAN group.

member vlan (ACL VLAN Group)

Add VLAN members to an ACL VLAN group.

C9000 Series

Syntax

member vlan {VLAN-range}

Parameters

VLAN-range

Enter the member VLANs using comma-separated VLAN

IDs, a range of VLAN IDs, a single VLAN ID, or a

combination. For example:

Comma-separated: 3, 4, 6

Range: 5-10

Combination: 3, 4, 5-10, 8