Reference Guide

dot1x max-supplicants
Restrict the number of supplicants that can be authenticated and permitted to access the network
through the port. This configuration is only takes effect in Multi-Auth mode.
C9000 Series
Syntax
dot1x max-supplicants number
Parameters
number Enter the number of supplicants that can be authenticated
on a single port in Multi-Auth mode. The range is from 1 to
128. The default is 128.
Defaults 128 hosts can be authenticated on a single authenticator port.
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.4.1.0 Introduced on the C-Series and S-Series.
Related
Commands
dot1x host-mode
dot1x port-control
Enable port control on an interface.
C9000 Series
Syntax
dot1x port-control {force-authorized | auto | force-
unauthorized}
Parameters
force-authorized Enter the keywords force-authorized to forcibly
authorize a port.
234
802.1X