Reference Guide

Parameters
remote-mac-
address
Specify the mac-addresses of the VLT peers which are in the
remote VLT Domain.
mac-address Enter the 48-bit hexadecimal address in nn:nn:nn:nn:nn:nn
format.
vlan-range
Enter the VLAN IDs in which proxy gateway is not needed.
The VLANs are excluded from doing proxy gateway. The
value can be a single VLAN ID or comma -separated, VLAN
IDs or a range of VLAN IDs or a combination. For example:
Comma-separated: 3, 4, 6
Range: 5-10
Combination: 3, 4, 5-10, 8
Command Modes VLT DOMAIN PROXY GW STATIC
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.7(0.1) Introduced on the S3048-ON.
9.7(0.1) Introduced on the S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
Usage Information You can configure the MAC address, of a VLT peer in remote VLT Domain, to be
associated with the static VLT proxy gateway and exclude a VLAN or a range of
VLANs from proxy routing..
Example
Dell(conf)#vlt-domain 1
Dell(conf-vlt-domain#proxy-gateway static
Dell(conf-vlt-domain-proxy-gw-static)#remote-mac-address
00:01:e8:06:95:ac exclude-vlan 3
show vlt-proxy-gateway
Display the VLT proxy gateway configuration.
C9000 Series
Syntax
show vlt-proxy-gateway [info] {lldp | static}
Parameters
lldp Display details about the LLDP VLT proxy gateway
configuration
2068
Virtual Link Trunking (VLT)