Reference Guide

Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010 and C1048P.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series
7.5.1.0 Introduced on the C-Series
E-Series Original command
Example
Dell#show file flash://startup-config
! Version 1-0(0-4079)
! Last configuration change at Wed Jun 24 02:02:40 2015 by
default
! Startup-config last updated at Wed Jun 24 02:02:44 2015 by
default
!
boot system rpm0 primary tftp://10.11.227.233/pt-c9000-2
boot system rpm0 secondary system: A:
boot system rpm0 default system: A:
boot system rpm1 primary tftp://10.11.227.233/pt-c9000-2
boot system rpm1 secondary system: A:
boot system rpm1 default system: A:
!
service timestamps log datetime
!
logging coredump
!
hostname Dell
!
protocol lldp
!
feature extended-bridge
!
redundancy auto-failover-limit count 3 period 60
redundancy auto-synchronize full
!
redundancy disable-auto-reboot pe all
!
enable password 7 b125455cf679b208e79b910e85789edf
!
username admin password 7 1d28e9f33f99cf5c
!
linecard 0 provision C9000LC2410G
!
interface TenGigabitEthernet 0/0
!
206
File Management