Reference Guide

igmp-snoop Enter the keywords igmp-snoop to display the igmp-
snooping counter information for the VLT.
interface Enter the keyword interface to display the interface
counter information for the VLT.
mac Enter the keyword mac to display the MAC address counter
information for the VLT.
ndp Enter the keyword ndp to display the VLT counter
information for NDP.
Default Not configured.
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
Usage Information If you do not add a parameter such as arp or mac, the output displays all of the
counters.
Example
Dell# show vlt counter
Total VLT counters
-------------------------
L2 Total MAC-Address Count :
IGMP MRouter Vlans count :
IGMP Mcast Groups count :
ARP entries count :
Example (igmp-
snoop)
Dell# show vlt counter igmp-snoop
Total IGMP VLT counters
----------------------
IGMP MRouter Vlans count : 1
IGMP Mcast Groups count : 5
Example (igmp-
snoop interface
port-channel)
Dell#show vlt counter igmp-snoop interface port-channel 2
VLT Port-ID: 2 IGMP Counter
-----------------------
IGMP MRouter Vlans count : 0
IGMP Mcast Groups count : 5
Virtual Link Trunking (VLT)
2053