Reference Guide

Version Description
9.7(0.1) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON. Added the
nfsmount:<mount-point> parameters to support remote
NFS file system.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on S-Series
7.5.1.0 Introduced on C-Series
E-Series Original command
Usage Information
To rename a file in the local file system from a PE console, use the rename
{flash: directory name/path | usbflash directory name/path}
command .
restore factory-defaults
Restore factory defaults on a switch.
C9000 Series
Syntax
restore factory-defaults {chassis {bootvar | clear-all | nvram}| domain
{bootvar | clear-all | nvram} | linecard {slot-id | all} {bootvar|
clear-all | nvram} | pe {pe-id | all} {bootvar | clear-all | nvram}|
rpm {slot-id | all} {bootvar | clear-all | nvram}}
Parameters
chassis Enter the keyword chassis to reset all the RPMs and line modules
(LM).
domain Enter the keyword domain to reset all the RPMs, LM, and port
extenders (PE).
linecard slot-id Enter the keyword linecard and the slot-id number. The slot-id
range is from 0 to 11. Enter linecard all to reset all the linecards.
pe pe-id Enter the keyword pe and the port extender (PE) ID. The pe-id range is
from 0 to 255. Enter pe all to reset all the PEs.
rpm Enter the keyword rpm to rest the RPM card.
bootvar Enter the keyword bootvar to reset the boot environment variables
only.
200
File Management