Reference Guide

des56 | aes128 (OPTIONAL) Enter the keyword des56 or aes128 to specify
the encryption mode.
• aes128 — Use 128 bit AES algorithm in CFB mode for
encryption.
• des56 — Use 56 bit DES algorithm in CBC mode for
encryption.
priv password (OPTIONAL) Enter a text string (up to 20 characters long)
password that enables the host to encrypt the contents of
the message it sends to the agent. Minimum: eight
characters long.
access access-
list-name
(Optional) Enter the standard IPv4 access list name (a string
up to 16 characters long).
ipv6 access-list-
name
(Optional) Enter the keyword ipv6 then the IPv6 access list
name (a string up to 16 characters long).
access-list-name
ipv6 access-list-
name
(Optional) Enter both an IPv4 and IPv6 access list name.
Defaults As above.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.6.(0.0) Added aes 128 encryption algorithm parameter.
9.4.(0.0) Added support for VRF.
9.0.2.0 Introduced on the S6000.
9.2(0.0) Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
1930
Simple Network Management Protocol (SNMP) and Syslog