Reference Guide

Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0)
Introduced on the C9010.
Usage Information
Example
Dell(conf)#snmp-server context line
Related
Commands
show snmp user — displays the information configured on each SNMP user name.
snmp-server community
Configure a new community string access for SNMPv1 v2 and v3.
C9000 Series
Syntax
snmp-server community community-name {ro | rw} [ipv6 ipv6-
access-list-name [ipv6 ipv6-access-list-name | access-list-name
| security-name name] | security-name name [ipv6 ipv6-access-
list-name | access-list-name | security-name name] | access-
list-name [ipv6 ipv6-access-list-name | access-list-name |
security-name name]]]
To remove access to a community, use the no snmp-server community
community-string {ro | rw} [security-name name [access-list-
name | ipv6 access-list-name | access-list-name ipv6 access-
list-name
]] command.
Parameters
community-name Enter a text string (up to 20 characters long) to act as a
password for SNMP.
ro Enter the keyword ro to specify read-only permission.
rw Enter the keyword rw to specify read-write permission.
ipv6 access-list-
name
(Optional) Enter the keyword ipv6 then an IPv6 ACL name
(a string up to 16 characters long).
security-name
name
(Optional) Enter the keywords security-name then the
security name as defined by the community MIB.
access-list-name (Optional) Enter a standard IPv4 access list name (a string up
to 16 characters long).
Simple Network Management Protocol (SNMP) and Syslog
1915