Reference Guide

flash:
([[flash://]directory
_path])
Enter the internal directory name and the directory path.
usbflash:
([[usbflash://]direc
tory_path])
Enter the USB flash directory name and the directory path.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010 and C1048P.
9.7(0.1) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON. Added the
nfsmount:<mount-point> parameters to support remote
NFS file system.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage Information
You can also use the cd {flash: directory name/path | usbflash
directory name/path} command from a port extender (PE) console to change
the working directory.
Example
Dell#cd flash://TRACE_LOG_DIR
188
File Management