Reference Guide

Defaults Not configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
Usage Information
To display these changes in the show bootvar command output, save the
running configuration to the startup configuration (using the copy command) and
reload the system.
To specify the IP address of the default next-hop gateway for the management
subnet, use the boot system gateway command.
Related Command show boot system — Displays information about boot images currently stored on
the system.
cd
Change to a different working directory.
C9000 Series
Syntax
cd {flash: directory name/path | usbflash directory name/path}
From a PE console, use cd {flash: directory name/path | usbflash
directory name/path } to change to a different working irectory.
Parameters
directory (OPTIONAL) Enter one of the following:
• flash: (internal flash) or any sub-directory
• nfsmount://<mount-point>/filepath: NFS-
mounted path
NOTE: While switching to a remote NFS file system,
it is mandatory to specify the mount-point that
indicates the working directory on the NFS file
system. You cannot enter the root directory of the
remote NFS file system.
• usbflash: (USB Flash) or any sub-directory
File Management
187