Reference Guide

Version Description
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Usage Information With password authentication enabled, you can authenticate using the local,
RADIUS, or TACACS+ password fallback order as configured.
ip ssh pub-key-file
Specify the file used for host-based authentication.
C9000 Series
Syntax
ip ssh pub-key-file {WORD}
Parameters
WORD Enter the file name for the host-based authentication.
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Usage Information
This command specifies the file used for the host-based authentication. The
creates/ file overwrites the flash://ADMIN_DIR/ssh/knownhosts file and
deletes the user-specified file. Even though this command is a global configuration
1864
Security