Reference Guide

commands {level |
role role-name
Enter the keyword command then a privilege level for
accounting of commands executed at that privilege level or
enter the keyword role then the role name for accounting
of commands executed by a user with that user role.
dot1x Enter the keyword dot1x for dot1x events.
name | default Enter one of the following:
• For name, enter a user-defined name of a list of
accounting methods.
• For default, the default accounting methods used.
start-stop Enter the keywords start-stop to send a “start
accounting” notice at the beginning of the requested event
and a “stop accounting” notice at the end of the event.
wait-start Enter the keywords wait-start to ensure that the TACACS
+ security server acknowledges the start notice before
granting the user’s process request.
stop-only Enter the keywords stop-only to instruct the TACACS+
security server to send a “stop record accounting” notice at
the end of the requested user process.
tacacs+ Enter the keyword tacacs+ to use TACACS+ data for
accounting. The Dell Networking OS currently only supports
TACACS+ accounting.
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.1) Added support for roles on the Z9500.
9.5(0.0) Added support for roles on the Z9000, S6000, S4820T,
S4810, and MXL
9.2(1.0) Introduced on the Z9500.
8.3.11.1 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
Security
1801