Reference Guide

match mac access-group
Configure a match criterion for a class map, based on the contents of the designated MAC ACL.
C9000 Series
Syntax
match mac access-group {mac-acl-name}
Parameters
mac-acl-name Enter a MAC ACL name. Its contents is used as the match
criteria in the class map.
Defaults none
Command Modes CLASS-MAP
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Available on the C-Series and S-Series.
7.5.1.0 Added support for the DSCP Marking option.
7.4.1.0 Introduced.
Usage Information To access this command, enter the class-map command. After the class map is
identified, you can configure the match criteria.
Related
Commands
class-map — identifies the class map.
match mac dot1p
Configure a match criterion for a class map based on a dot1p value.
C9000 Series
Syntax
match mac dot1p {dot1p-list}
Parameters
dot1p-list Enter a dot1p value. The range is from 0 to 7.
Defaults none
Quality of Service (QoS)
1699