Reference Guide

.
Defaults None
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
Usage Information
The following describes the output fields of the show power inline command:
Field Description
Interface Displays the line card or the port extender interface slot and
port number.
Inline Power
Allocated
Displays the amount of power allocated to the port.
Inline Power
Consumed
Displays the amount of power consumed by the connected
device.
Class
Displays the power classification of the connected device. If
the device is powered up properly, it displays Class 0, 1, 2, 3,
or 4. Displays the following under different conditions:
• NO_DEVICE if no device is present.
• LEGACY if a legacy device is connected.
• PD_S/C if a short-circuit condition is detected.
• PD_OVRLD if overload condition is detected.
Device Type Displays whether the device is Type 1 or Type 2.
PoE Port Priority Displays the power configured for the port (default is low).
See power inline priority.
LLDP Support Displays the power requested is via LLDP-MED extended
power-via-mdi TLV or IEEE 802.3at power-via-mdi TLV.
Example
Dell#show power inline pe 255 stack-unit 0
Global inline power Threshold : 99
Port Extenders (PE)
1653