Reference Guide
power budget global-threshold
Set a global threshold limit for the PoE power budget on a specified port extender.
C9000 Series
Syntax
power budget global-threshold pe pe-id stack-unit unit number
threshold-value
Parameters
pe pe-id Enter the keyword pe and port extender ID. Range is from 0
to 255.
stack-unit unit
number
Enter the keyword stack-unit and unit number. Range is
from 0 to 7.
threshold-value
Enter the power threshold limit value in percentage. Range
is from 10 to 99%. Default value is 99%.
Default None
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
Usage Information
Configure a global threshold limit for the Power over Ethernet (PoE) power budget
for a specified port extender. A default power threshold value of 99% is configured
when there is no threshold value configured.
Example
Dell(conf)#power budget global-threshold pe 1 stack-unit 0 99
Dell#show power detail pe 0 stack-unit 0
Unit Total System Redundancy Inline Inline Inline
Inline Inline
Power Power Power Power Power Power
Power Power
Available Consumed Consumed Threshold Available Allocated
Consumed Remaining
(Watts) (Watts) (Watts) (%) (Watts) (Watts)
(Watts) (Watts)
--------- ---------- --------- --------- --------- ---------
--------- --------------
0/0 1000 150 0 99 841
0 0 841
Related Command show power detail
1646
Port Extenders (PE)