Reference Guide

reg-client Enter the reg-client keyword to display the registered
manager — agent / (client) information.
Defaults None
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010. and C1048P.
Usage Information
The show software pemgr command is supported on a C1048P console.
Example: show
software pemgr pe
0 ipc-stats
Dell#show software pemgr pe-id 1 ipc-stats
IPC Message Based Statistics
---------------------------
Serivce Name : CLI Service Id :
0x10
MType : 0x1771 EndPoint :
CB
EnQCount : 0 packets
DeQCount : 0 packets
Messages in Q : 0 packets
AVG Q Proc Time : 0 ticks Max Q Proc
Time : 0 ticks
AVG Proc Time : 0 ticks Max Proc
Time : 0 ticks
Serivce Name : SYSADMTSK Service Id :
0x21
MType : 0x1c29 EndPoint :
CB
EnQCount : 8 packets
DeQCount : 8 packets
Messages in Q : 0 packets
AVG Q Proc Time : 2 ticks Max Q Proc
Time : 3 ticks
AVG Proc Time : 2 ticks Max Proc
Time : 3 ticks
Serivce Name : PEMGR Service Id :
0x14e
MType : 0x192 EndPoint :
CB
EnQCount : 38c packets
1632
Port Extenders (PE)