Reference Guide

Version Description
9.7(0.0) Added support for the track-id on the S4810, S4820T,
S6000, and Z9000.
9.5(0.1) Introduced on the Z9500
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
show cam pbr
Display the PBR CAM content.
C9000 Series
Syntax
show cam pbr {[interface interface] | linecard slot-number
port-set number]} [summary]
Parameters
interface interface Enter the keyword interface then the name of the
interface.
linecard number Enter the keyword linecard then the slot number. The
range is from 0 to 11.
port-set number Enter the keywords port-set then the port-pipe number.
summary Enter the keyword summary to view only the total number
of CAM entries.
Defaults none
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.8(0.0) Introduced on the S3048-ON and S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
Usage Information The show cam pbr command displays the PBR CAM content.
Policy-based Routing (PBR)
1611