Reference Guide

show system
Display the status of a specific stack-unit from the port extender (PE) console.
Syntax
show system [brief | stack-unit unit-id | stack-ports [status |
topology]
Parameters
brief (OPTIONAL) Enter the keyword brief to view an abbreviated
list of system information.
stack-unit unit-id (OPTIONAL) Enter the keywords stack-unit then the stack
unit number for information. The stack-unit number range is
from 0 to 7.
stack-ports status
| topology
(OPTIONAL) Enter the keywords stack-ports for information
about the status or topology of the stack ports.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010 and C1048P.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Added support for the disabled-ports parameter .
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.11.4 The brief parameter no longer displays the current Reload
mode. To display Reload mode, use the show reload-type
command. Modified the show system stack-unit
command output to support Piece Part ID (PPID).
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 The Boot Flash field displays the code level for boot code
2.8.1.1 and newer, while older boot codes display as "Present".
7.7.1.0 Added Master Priority field.
7.6.1.0 Introduced on the S-Series.
1522
PE Console Commands