Reference Guide

To disable redistribution, use the no redistribute isis [tag] [level-1 |
level-1-2 | level-2] [metric metric-value | metric-type type-
value] [route-map map-name] [tag tag-value] command.
Parameters
tag (OPTIONAL) Enter the name of the IS-IS routing process.
level-1 (OPTIONAL) Enter the keywords level-1 to redistribute
only IS-IS Level-1 routes.
level-1-2 (OPTIONAL) Enter the keywords level-1-2 to redistribute
both IS-IS Level-1 and Level-2 routes.
level-2 (OPTIONAL) Enter the keywords level-2 to redistribute
only IS-IS Level-2 routes.
metric metric-
value
(OPTIONAL) Enter the keyword metric then a number. The
range is from 0 (zero) to 4294967295.
metric-type type-
value
(OPTIONAL) Enter the keywords metric-type then one of
the following:
• 1 = for OSPF External type 1
• 2 = for OSPF External type 2
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name
of the route map.
tag tag-value (OPTIONAL) Enter the keyword tag to set the tag for routes
redistributed into OSPF. The range is from 0 to 4294967295.
Defaults Not configured.
Command Modes ROUTER OSPF
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for Multi-Process OSPF.
7.5.1.0 Introduced on the C-Series.
6.1.1.1 Introduced on the E-Series.
Open Shortest Path First (OSPFv2 and OSPFv3)
1429