Reference Guide

• threshold metric
• track interface line-protocol
show track ipv6 route
Display information about all tracked IPv6 routes, including configuration, current tracked state (UP or
DOWN), and the clients which are tracking an object.
C9000 Series
Syntax
show track ipv6 route [brief]
Parameters
brief (OPTIONAL) Display a single line summary of information
for tracked IPv6 routes.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
8.3.12.0 Introduced on the S4810.
8.4.1.0 Introduced.
Usage Command The following table describes the show track ipv6 route command shown in
the following example.
Output Description
Track object-id Displays the number of the tracked object.
Interface type
slot/port, IP route
ip-address, IPv6
route ipv6-
address
Displays the interface type and slot/port number or address
of the IPv4/IPv6 route that is being tracked.
object is Up/
Down
Up/Down state of tracked object; for example, IPv4
interface, reachability, or metric threshold of an IP route.
number changes,
last change time
Number of times that the state of the tracked object has
changed and the time since the last change in
hours:minutes:seconds.
1382
Object Tracking