Reference Guide

ManualsBrandsDell ManualsAccess PlatformsC1048P Port Extender

1361

Defaults none

Command Modes OBJECT TRACKING (conf_track_object-id)

Command History

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Introduced on the C9010.

9.8(0.0) Introduced on the S3048-ON and S4048-ON.

9.7(0.0) Introduced on the S6000-ON.

8.3.12.0 Introduced on the S4810.

8.4.1.0 Introduced.

Commands

• track interface ip routing – configures object tracking on the routing status of

an IPv4 Layer 3 interface.

• track interface line-protocol – configures object tracking on the line-protocol

state of a Layer 2 interface.

• track ip route metric threshold – configures object tracking on the threshold of

an IPv4 route metric.

• track ip route reachability – configures object tracking on the reachability of an

IPv4 route.

show running-config track

Display the current configuration of tracked objects.

C9000 Series

Syntax

show running-config track [object-id]

Parameters

object-id (OPTIONAL) Display information on the specified tracked

object. The range is 1 to 500.

Command Modes EXEC Privilege