Reference Guide

ManualsBrandsDell ManualsAccess PlatformsC1048P Port Extender

1351

off Enter the keyword off to set the other-config flag value as

OFF.

Defaults none

Command Modes POLICY LIST CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Introduced on the C9010.

9.7(0.0) Introduced on the S6000-ON.

9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, and

Z9000 switches.

Commands

• ipv6 nd ra-guard enable — Allows you to configure the RA guard related

commands.

• ipv6 nd raguard policy policy-name — Defines the router advertisement (RA)

guard policy name and enter the RA guard policy configuration mode.

reachable-time

Enable the verification of the configured reachability time in the received RA packets.

C9000 Series

Syntax

reachable—time value

To reset the advertised reachability time, use the no reachable-timevalue

command.

Parameters

value Enter the advertised reachability time in milliseconds. The

range is from 0 to 3,600,000 milliseconds.