Reference Guide

static ip-address (OPTIONAL) Enter the Static IP address in dotted decimal
format of the RPF neighbor.
ip-address (OPTIONAL) Enter the IP address in dotted decimal format
of the RPF neighbor.
distance (OPTIONAL) Enter a number as the distance metric assigned
to the mroute. The range is from 0 to 255.
Defaults Not configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
E-Series legacy
command
Related
Commands
show ip mroute — displays the routing table.
ip multicast-limit
To limit the number of multicast entries on the system, use this feature.
C9000 Series
Syntax
ip multicast-limit limit
Parameters
limit Enter the desired maximum number of multicast entries on
the system. The S-Series range is from 1 to 16000.
Defaults The S-Series default is 4000.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Multicast
1303