Reference Guide

| all | [number of tasks]}| rp {[number of tasks | details]} summary
Parameters
cp Enter the keyword cp to view CPU usage for the Control Processor.
lp Enter the keyword lp to view CPU usage for the Line Processor.
rp Enter the keyword rp to view CPU usage for the Route Processor.
pe pe-id Enter the keyword pe and the port extender (PE) ID. Range is from 0 to
255.
stack-unit unit
number
Enter the keyword stack-unit and the stack unit number. Range is from
0 to 7.
all Enter the keyword all to display usage information for all switch CPUs:
control processor, route processor, and linecards.
summary Enter the keyword summary to view a summary of CPU usage.
details Enter the keyword details to view detailed information about CPU
usage.
Command Modes
• EXEC
• EXEC Privilege
Defaults Display detailed information on CPU usage for all switch CPUs (control processor, route
processor, and linecards).
Command History
This guide is platform-specific. For command information about other platforms, see the
relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.5.1.0 Introduced on the C-Series.
Usage Information
The following examples display CPU usage information for the control processor (CP), route
procesor (RP), and the port extender (PE).
Example show
processes cpu cp
Dell#sho processes cpu cp
CPUID 5sec 1min 5min
-------- ---------- ----------- -----------
CORE 0 0.59 1.18 0.00
CORE 2 0.20 0.44 0.00
Overall 0.40 0.81 0.00
130
Control and Monitoring