Reference Guide

To return to the default, use the no advertise med location-
identification {coordinate-based value | civic-based value |
ecs-elin value} command.
Parameters
coordinate-based
value
Enter the keywords coordinate-based then the
coordinated based location in hexadecimal value of 16
bytes.
civic-based value Enter the keywords civic-based then the civic based
location in hexadecimal format. The range is from 6 to 255
bytes.
ecs-elin value Enter the keywords ecs-elin then the Emergency Call
Service (ecs) Emergency Location Identification Number
(elin) numeric location string. The range is from 10 to 25
characters.
Defaults unconfigured.
Command Modes CONFIGURATION (conf-lldp)
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Introduced on the S-Series.
7.6.1.0 Introduced on the C-Series and E-Series.
Usage Information
• ECS — Emergency call service such as defined by TIA or the national
emergency numbering association (NENA)
• ELIN — Emergency location identification number, a valid North America
Numbering Plan format telephone number supplied for ECS purposes.
Related
Commands
debug lldp interface — debugs LLDP.
show lldp neighbors — displays the LLDP neighbors.
show running-config lldp — displays the LLDP running configuration.
1292
Link Layer Discovery Protocol (LLDP)