Reference Guide

---------------------------
LLDP
Related
Commands
• show interfaces — displays the interface configuration.
• show interfaces transceiver — displays the physical status and operational status
of an installed transceiver. The output also displays the transceiver’s serial
number.
show linecard
Display the linecard(s) status.
C9000 Series
Syntax
show linecard [slot-id [brief] | all]
Parameters
slot-id (OPTIONAL) Enter a slot ID to view information on the line
card in that slot. For the C9010, the range is from 0 to 11.
For the C-Series, the range is 0 to 7. For the E-Series, the
range is 0 to 13 on the E1200, 0 to 6 on the E600, and 0 to
5 on the E300.
all (OPTIONAL) Enter the keyword all to view a table with
information on all present line cards
brief (OPTIONAL) Enter the keyword brief to view an
abbreviated list of line card information.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the C9010.
8.1.1.0 Introduced on the E-Series ExaScale.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage Information
show linecard
output Field
Description
Line card Displays the line card slot number (only listed in the show
linecard all command output).
Status Displays the line card’s status.
124
Control and Monitoring