Reference Guide

port-set Enter the keyword port-set and specify the port-set
number. The port-set number value is 0.
vrf vrf-name (OPTIONAL) Enter the keyword vrf followed and the name
of the VRF to display IPv6 CAM entries corresponding to that
VRF.
NOTE: If you do not specify this option, IPv6 CAM entries
corresponding to the default VRF are displayed.
X:X:X:X::X (OPTIONAL) Enter the network address or host name.
summary (OPTIONAL) Enter the keyword summary to display a table
listing network prefixes and the total number prefixes which
can be entered into the IPv6 CAM.
Defaults none
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.7.1 Introduced on the S4810.
8.4.2.1 Introduced on the S-Series.
Example
Dell#show ipv6 cam linecard 10 port-set 0
Neighbor Mac-Addr Port VId EC
---------------------------------------------------------------
fe80::2ff:eff:fe3f:a1 00:00:00:00:00:00 CP 0 0
2::3 00:00:00:00:00:00 CP 0 0
refix Mac-Addr Port VId EC
---------------------------------------------------------------
2::/64 00:00:00:00:00:00 CP 0 0
fe80::/10 00:00:00:00:00:00 NuP 0 0
::/0 00:00:00:00:00:00 CP 0
1202
IPv6 Basics